NTN ASPF205 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 9-27/32" Bore, 2-63/64" Bolt Hole Spacing Width, 3-3/4" Height, 1765 Static Load Capacity, 3147 Dynamic Load Capacity

This NTN ASPF series light-duty flange ball bearing unit with three bolt holes, contact seals, and a setscrew lock is designed for mounting onto bearing surfaces perpendicular to the shaft axis. This ready-to-mount flange unit has a pressed steel housing for light-duty applications that support low to moderate speeds or that do not require rigid mounting. The double-sealed, deep-groove chromium steel radial ball bearing insert in the housing is made of through-hardened chromium steel and is rated “light duty” for applications with moderate radial loads and light thrust or combination loads. It has a narrow inner ring on one side for increased shaft support, and a spherical outer surface that compensates for misalignments. Synthetic rubber lip contact seals on both sides of the bearing retain lithium soap-based grease applied at manufacture and help keep out contaminants. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.NTN manufactures bearings, joints, hubs, components, and assemblies that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1918, is based in Osaka, Japan.

• Pressed steel flanged housing for light-duty applications with low to moderate speeds
• Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads
• Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out
• Setscrew lock for a three-point contact hold on the shaft
• Extended inner ring for increased shaft support